CAD/CAM Tam Protezler

Polzer I, Schimmel M, Müller F, et al. Edentulism as part of the general health problems of elderly adults. International Dental Journal. 2010;60(3):143-155.

Walls AWG, Steele JG. The relationship between oral health and nutrition in older people. Mechanisms of Ageing and Development. 2004;25(12):853-857.

Sun Y, Lü P, Wang Y. Study on CAD&RP for removable complete denture. Computer Methods and Programs in Biomedicine. 2009;93(3):266-272.

McCabe JF, AW Walls. Applied Dental Materials. 1998: Blackwell Science.

Aguirre BC, Chen JH, Kontogiorgos ED, et al. Flexural strength of denture base acrylic resins processed by conventional and CAD-CAM methods. Journal of Prosthetic Dentistry. 2020;123(4):641-646.

Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. 2012. Elsevier Health Sciences.

Zarb GA, Bolender CL, Eckert SE, et al. Prosthodontic treatment for edentulous patients. Complete dentures and implant-supported prostheses. 2004 12th. ed. St. Louis: Mosby.

Gad MM, Fouda SM, ArRejaie AS, et al. Comparative effect of different polymerization techniques on the flexural and surface properties of acrylic denture bases. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2019;28(4): 458-465.

Al‐Dwairi ZN, Tahboub KY, Baba NZ, et al. A comparison of the surface properties of CAD/CAM and conventional polymethylmethacrylate (PMMA). Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry.2019; 28(4): 452-457.

Chhabra M, Kumar MN, Raghavendra Swamy KN, et al. Flexural strength and impact strength of heat-cured acrylic and 3D printed denture base resins-A comparative in vitro study. Journal of Oral Biology and Craniofacial Research, 2022;12(1):1-3.

Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. Journal of Prosthetic Dentistry. 2013;109(6):361-366.

Fernandez MA, Nimmo A, Behar‐Horenstein LS. Digital denture fabrication in pre‐and postdoctoral education: a survey of US dental schools. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2016;25(1): 83-90.

Infante L, Yilmaz B, McGlumphy E, et al. Fabricating complete dentures with CAD/CAM technology. Journal of Prosthetic Dentistry. 2014;111(5):351-355.

Han W, Li Y, Zhang Y. Design and fabrication of complete dentures using CAD/CAM technology. Medicine. 2017; 96(1):1-8

Goodacre BJ, Goodacre CJ, Baba NZ. Comparison of base adaptation between CAD/CAM and conventional fabrication techniques. Journal of Prosthetic Dentistry. 2016;116:249-256

Helal A, AlRumaih HS, Kattadiyil MT. Comparison of retention between maxillary milled and conventional denture bases: a clinical study. Journal of Prosthetic Dentistry. 2017;117:233-238

Ayman AD. The residual monomer content and mechanical properties of CAD/CAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electron Physician. 2017;9: 4766-4722

Ali IL, Yunus N, Abu-Hassan MI. Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry 2008;17:545-549

Sipahi C, Anil N, Bayramli E. The Effect of acquired salivary pellicle on the surface free energy and wettability of different denture base materials. Journal of Dentistry. 2001;29:197-204

Gesser HD, Castaldi CR. The preparation and evaluation of wetting dentures for adhesion and retention. Journal of Prosthetic Dentistry. 1971; 25:236-243

Al-Qarni FD, Goodacre CJ, Kattadiyil MT, et al. Stainability of acrylic resin materials used in CAD/CAM and conventional complete dentures. Journal of Prosthetic Dentistry. 2020;123(6):880-887

Steinmassl O, Offermans V, Stöckl W, et al: In vitro analysis of the fracture resistance of CAD/CAM denture base resins. Materials (Basel) 2018;11(3):401.

Al-Dwairi ZN, Tahboub KY, Baba NZ. A comparison of the flexural and impact strengths and flexural modulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (PMMA). Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2020;29(4):341-349.

Srinivasan M, Schimmel M, Naharro M, et al. CAD/CAM milled removable complete dentures: time and cost estimation study. Journal Of Dentistry 2019;8:75-79

Bilgin MS, Baytaroglu EN, Erdem A, et al. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. European Journal of Dental Education 2016;10:286-291.

Baba NZ, Goodacre BJ, Goodacre CJ, et al. CAD/CAM Complete Denture Systems and Physical Properties: A Review of the Literature. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2021 May;30(S2):113-124.

Barazanchi A, Li KC, Al‐Amleh B, et al. Additive technology: update on current materials and applications in dentistry. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry.2017; 26(2), 156-163.

Janeva NM, Kovacevska G, Elencevski S, et al. Advantages of CAD/CAM versus conventional complete dentures-a review. Open access Macedonian Journal Of Medical Sciences. 2018; 6(8): 1498-1502.

Liebermann A, Wimmer T, Schmidlin PR, et al. Physicomechanical characterization of polyetheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media. Journal of Prosthetic Dentistry. 2016;115(3): 321-328.

Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. Journal of the California Dental Association. 2013;41(6): 407-416.

Bonnet G, Batisse C, Bessadet M, et al. A new digital denture procedure: a first practitioners appraisal. BMC Oral Health. 2017; 17(1): 1-13.

Schweigera J, Stumbaumb J, Edelhoffc D, et al. Systematics and concepts for the digital production of complete dentures: risks and opportunities Systematik und Konzepte zur digitalen Herstellung von Totalprothesen–Chancen und Risiken. International Journal Of Computerized Dentistry. 2018 21(1), 41-56.

Deng K, Chen H, Li R, et al. Clinical evaluation of tissue stops on 3D-printed custom trays. Scientific Reports. 2019; 9(1):1-9.

Austin AT, Basker RM: The level of residual monomer in acrylic denture base materials with particular reference to a modified method of analysis. British Dental Journal 1980;149:281-286

Bettencourt AF, Neves CB, de Almeida MS, et al. Biodegradation of acrylic based resins: a review. Dental Materials 2010;26(5):e171-80

Singh RD, Gautam R, Siddhartha R, et al. High performance liquid chromatographic determination od residual monomer released from heat-cured acrylic resin. An in vitro study. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry 2013;22:358-361

Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dental Materials 1997;13:258-269

Morgan TD, Wilson M. The effects of surface roughness and type of denture acrylic on biofilm formation by Streptococcus oralis in a constant depth film fermentor. Journal of Applied Microbiology 2001;91:47-53

Al-Fouzan A, Al-mejrad LA, Albarrag AM. Adherence of Candida to complete denture surfaces: a comparison of conventional and CAD/CAM complete dentures. Journal of Advanced Prosthodontics 2017;9:402-408

Machado AL, Giampaolo ET, Vergani CE, et al. Changes in roughness of denture base and reline materials by chemical disinfection or microwave irradiation: surface roughness of denture base and reline materials. Journal of Applied Oral Science. 2011;19:521-528.

De Foggi CC, Machado AL, Zamperini CA, et al. Effect of surface roughness on the hydrophobicity of a denture‐base acrylic resin and Candida albicans colonization. Journal of Investigative and Clinical Dentistry. 2016; 7(2):141-148.

Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness or prepolymerized poly(methyl methacrylate) denture base materials. Journal of Prosthetic Dentistry. 2019;121:347-352

Alammari MR. The influence of polishing techniques on pre-polymerized CAD/CAM acrylic resin denture bases. Electron Physician 2017;25:5452-5458

Woelfel JB, Paffenbarger GC, Sweeney WT Dimensional changes occurring in dentures during processing. Journal of The American Dental Association 1960;61:413-430

Wong DM, Cheng LY , Chow TW , et al. Effect of processing method on the dimensional accuracy and water sorption of acrylic resin dentures. Journal of Prosthetic Dentistry. 1999;81:300-304

Tasaka A, Matsunaga S, Odaka K, et al. Accuracy and retention of denture base fabricated by heat curing and additive manufacturing. Journal of Prosthodontıc Research 2019;63:85-89

Kalberer N, Mehl A, Schimmel M, et al. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: an in vitro evaluation of trueness. Journal of Prosthetic Dentistry. 2019;121:637-643

McLaughlin JB, Ramos V Jr, Dickinson DP. Comparison of fit of dentures fabricated by traditional techniques versus CAD/CAM technology. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry 2019;28:428-435

AlRumaih HS, AlHelal A, Baba NZ, et al. Effects of denture adhesive on the retention of milled and heat-activated maxillary denture base: a clinical study. Journal of Prosthetic Dentistry. 2018;120:361- 366

Imirzalioglu P, Karacaer O, Yilmaz B, et al. Color stability of denture acrylic resins and a soft lining material against tea, coffee, and nicotine. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2010;19:118-124

Zuo W, Feng D, Song A, et al. Effects of organic-inorganic hybrid coating on the color stability of denture base resins. Journal of Prosthetic Dentistry. 2016;115:103-108

Pacquet W, Benoit A, Hatège-Kimana C, et al. Mechanical properties of CAD/CAM denture base resins. International Journal of Prosthodontics 2019;32:104-106

Arslan M, Murat S, Alp G, et al. Evaluation of flexural strength and surface properties of prepolymerized CAD/CAM PMMA-based polymers used for digital 3D complete dentures. Internatıonal Journal of Computerized Dentistry 2018;21:31-40

Saponaro PC, Yilmaz B, Heshmati RH, et al. Clinical performance of CAD-CAM-fabricated complete dentures: a cross-sectional study. Journal of Prosthetic Dentistry. 2016;116:431-435

Saponaro PC, Yilmaz B, Johnston W, et al. Evaluation of patient experience and satisfaction with CAD-CAM-fabricated complete dentures: a retrospective survey study. Journal of Prosthetic Dentistry. 2016;116:524-528

Karci M, Demir N, Yazman S. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles. Journal of Prosthodontics-Implant Esthetic and Reconstructıve Dentistry. 2019;28(5): 572-579.