KVJ Posterior Yaklaşımlar
Synopsis
In this chapter, posterior surgical approaches, decompression techniques, and fixation methods applied in craniovertebral junction (CVJ) pathologies are comprehensively analyzed. The decision for surgical intervention is made by taking into account the patient's history, neurological examination findings, anatomical localization of spinal canal compression, and instability status. Alongside ventral approaches, dorsal/posterior decompression is frequently preferred in conditions such as trauma, tumor, infection, rheumatoid arthritis, achondroplasia, Chiari malformation, and C1-C2 subluxation. During surgery, with the patient placed in the prone position, suboccipital craniectomy, laminectomy, and duraplasty can be performed depending on clinical requirements. It is emphasized that due to the complex neurovascular anatomy of the CVJ and its role in accommodating 80% of head movements, implants are subjected to excessive loads, creating a risk of non-union. For stabilization and fusion, Gallie, Brooks, and Sonntag sublaminar cable techniques, Halifax interlaminar clamps, C1-C2 transarticular screw fixation as defined by Magerl, C1-C2 polyaxial screw-rod systems modified by Goel-Laheri and Harms-Melcher, C2 intralaminar screw fixation defined by Wright, and occipitocervical screw-plate/rod systems are utilized. Preoperatively, the course of the vertebral artery and anatomical variations must be meticulously evaluated using CT and MRI to prevent severe complications such as dural injury, CSF leakage, vascular injury, and respiratory distress.
References
Paramore CG, Sonntag VKH, Spetzler RF. Upper cervikal and craniocervical decompression, pp 195-204. In Benzel EC (ed): Spine surgery. Churchill Livingstone, New York, 1999.
Berkman MZ, Özer AF. Kranyoservikal bileşkeye anterior ve posterior girişim teknikleri, Zileli M, Özer AF (eds), Omurilik ve Omurga Cerrahisi, pp 1429-1446, Meta Basım, İzmir, 2002.
Caspar W, Barbier DD, Klara PM. Anterior cervical fusion and Caspar plate stablitation for cervical trauma. Neurosurgery. 1989;25:491-502.
Bertalanffy H, Seeger W. The dorsolateral, suboccipital, transcondylar approach to the lower clivus and anterior portion of the craniocervical junction. Neurosurgery. 1991; 29:815:821.
Kotil K, Ton T, Tari R, et al. Delamination technique together with longitudinal incisions for treatment of Chiari I/syringomyelia complex: a prospective clinical study. Cerebrospinal Fluid Research. 2009; 6:7.
Kukreja S, Ambekar S, Sin AH, et al. Occipitocervical Fusion Surgery: Review of Operative Techniques and Results. J Neurol Surg B 2015;76:331–339.
Crockard HA, Sonntag VKH. Upper cervikal and occipitocervical arthrodesis, pp 207–218. In Benzel EC (ed): Spine surgery. Churchill Livingstone, New York, 1999.
Crockard HA: Evaluation of spinal laminar fixation by a new, flexible stainles steel cable (soft wire): early results. Neurosurgery. 1994;35:892-897.
Visocchi M, Di Rocco F, Meglio M. Craniocervical junction instability: instrumentation and fusion with titanium rods and sublaminar wires. Effectiveness and failures in personal experience. Acta Neurochir (Wien).2003;145:265-272.
Fehlings MG, Errico T, Cooper P, et al. Occipitocervical fusion with a five-millimeter malleable rod and segmental fixation. Neurosurgery. 1993;32:198-208.
Inamasu J, Kim DH, Klugh A. Posterior instrumentation surgery for craniocervical junction instabilities: an update. Neurol Med Chir (Tokyo).2005;45:439-447.
Puttlitz CM, Melcher RP, Kleinstueck FS, et al. Stability analysis of craniovertebral junction fixation techniques. J Bone Joint Surg Am . 2004;86-A:561-568.
Kotik K, Yavaşça P, Bilge T. Postoperative massive macroglossia in Klippel-Feil syndrome after posterior occipitocervical fixation surgery in the sitting position. J Spinal Disord Tech. 2006;19:226-229.
Nishizawa S, Yamaguchi M, Matsuzawa Y. Interlaminar fixation uxing atlantoaxial posterior fixation system (3XS) for atlantoaxial instability: surgical results and biomechanical evaluatiın. Neurol Med Chir (Tokyo). 2004;44:61-67.
Çalışaneller T, Yılmaz C, Özdemir Ö, et al. Posterior atlantal lateral mass fixation technique with polyaxial screw and rod fixation systerm. Turk Neurosurg. 2008;18:142-148.
Neo M, Matsushita M, Iwashita Y et al. Atlantoaxial transarticular screw fixation for a high-riding vertebral artery. Spine.2003;28:666-670.
Dickman CA, Sonntag VK. Posterior C1-C2 transarticular screw fixation for atlantoaxial arthrodesis. Neurosurgery. 1998;43:275-280.
Haid RW Jr. C1-C2 transarticular screw fixation: technical aspects. Neurosurgery. 2001;49:71-74.
Stulik J, Vyskocil T, Sebesta P, Kryl J. Atlantoaxial fixation using the polyaxial screw-rod system. Eur Spine Jç 2007;16:479-484.
Goel A, Leheri V. Plate and screw fixation for atlantoaxial subluksation. Acta Neurochir. 1994;129:47-53.
Harms J, Melcher PR. Posterior C1-C2 fusion with polyaxial screw and rod fixation. Spine. 2001;26:2467-2471.
Elliott RE, Tanweer O, Boah A, et al. Comparison of safety and stability of C-2 pars and pedicle screws for atlantoaxial fusion: meta-analysis and review of the literature. J Neurosurg Spine 2012;17:577-93.
Resnick DK, Benzel EC. C1-C2 pedicle screw fixation with rigit cantilever beam contruct: case report and technical note. Neurosurgery.2002;50:426-428.
Kotik K, Kalaycı M, Bilge T. Management of cervicomedullary compression in patients with congenital and acquired osseous-ligamentous pathologies. J Clin Neurosci. 2007;14:540-549.
Wright NM. Posterior C2 fixation using bilateral, crossing C2 laminar screws: case series and technical note. J Spinal Disord Tech 2004;17:158-62.